Home> Products > Food Safety Testing Kits

Ochratoxin A Colloidal Gold Rapid Detection Card

Principle and Application
This product is made by the principle of competitive inhibition colloidal gold immunochromatography, and is used to detect Ochratoxin A (OTA) residues in grains, feedstuffs and other samples.
After the sample solution is dropped into the sample adding hole of the detection card, the Ochratoxin in the sample solution combines with the gold labeled antibody, thus preventing the gold labeled antibody from combining with the Ochratoxin conjugate on the cellulose membrane. When the Ochratoxin content in the sample solution is greater than the detection limit, the detection line does not show color (or the color is lighter than the control line), and the result is positive; When the content of Ochratoxin in the sample solution is less than the detection limit, the detection line appears purplish red (the color is consistent with or deeper than the control line), and the result is negative.

Technical indicators

2.1 Lower limit of sample detection:
Urine sample: 3 ppb
Organization: 8 ppb
Feed: 30 ppb


 Kit composition
Detection card: 40 pieces/box
Instructions: 1 copy



Negative: Within the detection window, a purple red line appears on the control line (C), and the color of the detection line (T) is consistent or deeper than the control line, indicating that the concentration in the sample is below the detection limit or does not contain.
Positive: Within the detection window, a purple red line appears on the control line (C), while the detection line (T) does not show color or is lighter than the control line. Indicates that the concentration in the sample is above the detection limit.
Invalid: Within the detection window, there is no purple red line on the control line (C).


Precautions
1 Products that have expired or have damaged aluminum foil bags cannot be used.
2 When removing the detection card from the refrigerator, it should be restored to room temperature before opening. The opened detection card should be used as soon as possible to avoid failure due to moisture.
3 Do not touch the white film surface in the center of the detection card.
4 Droppers should not be mixed to avoid cross contamination.

5 The sample solution to be tested should be clear, free from turbid particles, and bacterial contamination, otherwise it may lead to abnormal phenomena such as blockage and unclear color development, which may affect the judgment of experimental results.


 Storage and shelf life
Storage conditions: The reagent kit should be stored in a dry environment at 2-30 ℃.
Shelf life: The product has a validity period of 1 year, and the production date can be found in the packaging box.